Putty powder for interior wall: mainly used for leveling the surface of base material, generally not directly applied to the paint surface. During the construction, the whole batch shall be scraped 2-3 times, the first batch shall be repaired mainly, and the second batch shall be scraped flat without exposing the bottom. 2m aluminum alloy ruler can be scraped horizontally and then longitudinally to meet the requirements of straightness and verticality. After drying, polish the wall and remove the polishing dust. The dosage is about 2.5-4.0kg/m2. Putty powder for inner wall with smooth surface: it should be used together with leveling putty powder for inner wall to meet the requirements of smooth and delicate basic surface.

　　膩?zhàn)臃鄣氖┕し椒ㄍǔＪ欠峙?刮)涂，由于需要用量大，施工勞動強度也大，所以一定要有好的施工質量，否則會直接影響膩?zhàn)拥氖褂谩Ｄ佔臃鄣氖┕ば阅馨ㄅ魏蛼伖狻Ｅ问侵改佔优问指腥彳洝⒐饣o粘稠感，刮板批背無卷邊，有適當?shù)母稍飼r間，以便于對刮傷部位的缺陷進行適當?shù)男薷?良好的研磨性能是指膩?zhàn)尤菀籽心ス饣心r不費力。

　　The construction method of putty powder is usually batch coating (scraping). Due to the large demand and the high labor intensity, it is necessary to have good construction quality, otherwise it will directly affect the use of putty. The construction performance of putty powder includes scraping and polishing. Scraping refers to the soft, smooth and non sticky feeling of putty scraping, no curling on the back of scraper scraping, and proper drying time, so as to facilitate the proper modification of the defects of the scraping parts; good grinding performance refers to the putty is easy to grind smooth and easy to grind.

　　平墻式內墻在膩?zhàn)臃凼┕r一般批量刮2次，每次厚度不超過0.5mm。干燥后，打磨墻面，清除拋光灰塵。用量約為1.2-1.5kg/m2。平面內墻膩?zhàn)臃?適用于普通場合，以滿足涂料裝飾工程對底面的一般要求。施工一般批量刮2次，每次厚度約1mm。干燥后，打磨墻面，清除拋光灰塵。用量約1.5-1.8kg/m2。注:一般拋光時間不宜過晚，約12-24小時為宜，過晚會影響拋光。

　　During the construction of putty powder, the flat wall type interior wall is generally scraped twice in batch, with the thickness not exceeding 0.5mm each time. After drying, polish the wall and remove the polishing dust. The dosage is about 1.2-1.5kg/m2. Putty powder for plane interior wall: it is suitable for ordinary occasions to meet the general requirements for the bottom surface of paint decoration engineering. Generally, the construction shall be scraped twice in batches, with a thickness of about 1mm each time. After drying, polish the wall and remove the polishing dust. The dosage is about 1.5-1.8kg/m2. Note: the general polishing time should not be too late, about 12-24 hours is appropriate, too late affects polishing.

　　有人認為光澤性和膩?zhàn)臃鄣睦砘再|(zhì)是一對矛盾,即膩?zhàn)佑捕雀摺⑽锢砘瘜W(xué)性質是好的,是不容易的光澤,和光澤容易的膩?zhàn)佑捕炔?物理化學性質性相對較低。這有一定道理，但不是全部。有些膩?zhàn)涌捎糜诟稍锖蟮哪佔幽?qiáng)度的時間差進行拋光。也就是說，膩?zhàn)颖∧け砻嬉迅稍铮稍谀佔訌?qiáng)度(硬度)時進行拋光，研磨時可提高極高。膩?zhàn)臃垡啄ィ砘阅芎芎谩?/div>

　　The above is the relevant content introduced by Jinan putty powder manufacturer. To learn more, please visit the website: http://m.man5g.cn